EVERLAST METALS: W-LOC
Metal Wall & Soffit Panel Profile

The Everlast Metals W-LOC Soffit Panel is a v-groove panel available in a solid or vented profile. Application for use is endless but seen typically on porch ceilings, overhangs, and patios. W-LOC vented allows for 11% of net free area allowing for air circulation while decreasing condensation. The interlocking design of this system allows for quick installation.

The panel is available in a wide variety of materials and finishes. Substrates include G-90 Galvanized Steel, Galvalume® steel, and Aluminum. All painted products are Fluropon® coated.

The W-LOC is also available as a solid profile.

METHOD OF APPLICATION:

Everlast Metals W-LOC panels must be installed in a sequential pattern. Application of an Everlast Metals approved underlayment prior to panel installation is recommended when installed over a solid substrate.

Storage:

Everlast Metals metal panels should be stored in a well-ventilated, dry place where no moisture can contact them. Moisture (from rain, snow, condensation, etc.) trapped between layers of material may cause water stains or white rust, which can affect the service life of the material and will detract from its appearance. If outdoor storage cannot be avoided, protect the panels with a ventilated canvas or waterproof paper cover. Do not use plastic, which can cause condensation. Keep the material off the ground in an inclined position with an insulator such as wood. Protective film may degrade or become brittle with long-term exposure to direct sunlight.