General Use & Method of Application
Install in accordance with industry-recognized sheet metal practices.
Cut, form, and fasten using conventional hand or power tools.
For best results cutting tool edges should be kept sharp, clean, properly dressed, and closely aligned.
Storage:
Everlast Metals metal panels should be stored in a well-ventilated, dry place where no moisture can contact them. Moisture (from rain, snow, condensation, etc.) trapped between layers of material may cause water stains or white rust, which can affect the service life of the material and will detract from its appearance. If outdoor storage cannot be avoided, protect the panels with a ventilated canvas or waterproof paper cover. Do not use plastic, which can cause condensation. Keep the material off the ground in an inclined position with an insulator such as wood.
Panel Size:
Panel Widths: 36”
Seam Height: 3/4”
Minimum Panel Length: 36”
Maximum Panel Length: 40’
Testing:
Testing is not applicable for all combinations of substrates, materials, and dimensions. All construction assemblies must be installed in accordance with the testing assembly. Please refer to the Product Specifications on the Everlast Metals website for tested assemblies and code listings.
