This button is green for a reason. Only print when you have to.
Can't display this module in this section.
DL-200 and SSL-175 Panels

Have a 20-year Weather Tight Warranty available!


Everlast Metals Tech Data DL-150
Everlast Metals DL-150 Double-Lock Standing Seam roofing panel utilizes the proven seaming process of Mechanical Locking in conjunction with the floating action of a concealed clip assembly. This design allows for expansion & contraction caused by natural elements, providing a virtually leak proof roof with exceptional wind uplift ratings. The panel is available in a wide variety of materials and finishes including Trinar coated G-90 Galvanized Steel, Galvalume® Steel, and Aluminum, as well as Copper and Zinc. An optional thermally applied pre-assembly in-seam sealant is available. The minimum slope requirement is 1:12
Everlast Metals DL-150 panels must be installed in a sequential pattern. Application of a Everlast Metals approved underlayment prior to panel installation is recommended when installed over a solid substrate. Panels must be locked in the field by a mechanical seamer.
Everlast Metals metal panels should be stored in a well-ventilated, dry place where no moisture can contact them. Moisture (from rain, snow, condensation, etc.) trapped between layers of material may cause water stains or white rust, which can affect the service life of the material and will detract from its appearance. If outdoor storage cannot be avoided, protect the panels with a ventilated canvas or waterproof paper cover. Do not use plastic, which can cause condensation. Keep the material off the ground in an inclined position with an insulator such as wood. Protective film may degrade or become brittle with long-term exposure to direct sunlight.
Panel Size
Panel Widths: 12", 16", 20"
Seam Height: 1.5”
Min. Panel Length: 2.0’
Max. Panel Length: 50’ (Longer lengths require on-site rollforming)



ASTM E 1592 Structural
ASTM E 1680 Air Penetration Roofs
ASTM E 1646 Water Infiltration Roofs
TAS125(UL90) Florida Product Approval
TAS100 Wind Driven Rain
TAS201 Impact Resistance
Class 4 Hail Resistance
ASTM E 330 Structural
ASTM E 283 Air Leakage
ASTM E 331 Water Penetration
ASTM E 72 Structural